SELSİL FIXER 2K

Product Description:Two component , constituted resin and hardener ,epoxy acrylate  based chemical anchor system. .

Properties:
Fast curing
Thioxotropik ,don’t make flow.
Material is easily applicable with special gun.
Material color remains constant.

Applications:
Product is used in shoot planting works for concrete and rock walls
High load exposed to for anchorage and montage applications.

Apply
Remove the cover of the cartridge.Place the special mixer on the tip of the cartridge. Don’t use without mixer. Place the product in special cartridge gun. Make a hole appropriate to the diameter and depth of the anchor by using a driller. Purify the hole from dust and dirt by using a brush or air pomp. Grease and dust don’t exist sure of in hole after place anchor. Squeeze the product until it becomes grey (about 10-15 cm) and don’t use this part. The product about fifty fifty filled in hole with special gun. Anchorage material to turn round slowly place . Product’s curing time must complete for service to open.

Packing: 345 ml cartridges
Colors: Green and Grey
Shelf life: 12 month  in unopened packing .Close and direct sunlight for place storage.

Caution: Keep out of reach  of children.Avoid contact with skin and use in a well ventilated areas and avoid breathing the vapor. Don’t smoke nearby. Use protective clothes such us glove and glasses during application .In case of contact with skinwash immediately with water . For more information look at material safety data sheet.